Sunday, January 19, 2014

Determination Of Carbonate In Marine Solid Sample

View Online / Journal Homepage / Table of Contents for this issue THE analyst COMMUNICATION Determination of carbonate in marine unshakable precedents by FTIR-ATR spectrometry Mauro Mecozzi,* Eva Pietrantonio, Marina Amici and Giulia Romanelli Istituto Centrale per la Ricerca Scientifica e Tecnologica Applicata al Mare, via di Casalotti n. 300, 00166 Roma, Italy. e-mail: mecoma@rdn.it Received 9th November 2000, Accepted 10th January 2001 first published as an Advance Article on the net 18th January 2001 A regularity for detecting carbonate in marine unscathed samples (sediments, corals) by Fourier transform infrared spectroscopy (FTIR) coupled to the heart attenuated reflectance (ATR) technique is described. Compared to other techniques, the proposed method is non based on the measurement of carbon dioxide evolved by electrocution or acidification of the sample, but on the control measurement of carbonate present in the sample. For this reason, the method by FTIR-ATR spectroscopy does non require any chemical pre-treatment. The proposed method allows determination of carbonate in the range 6 hundred% (w/w) as Na2CO3 and gives comparable results with the determination of inorganic carbon by elemental abstract. www.rsc.org/analyst frozen (220 °C) until the summary.
bestessaycheap.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
Coral samples (Cladocora caespitosa) were collected at Civitavecchia (Tyrrhenian Sea). 2.2 FTIR analysis FTIR analysis was performed on samples previously dried at 40 °C for 24 h at least and because pulverized in an agate mortar. FTIR spectra were obtained by a Jasco 410 spectrophotometer. For t he ATR spectra a even ZnSe crystal appurt! enance (Pike Technology model with a 45° incidence cant over and 10 internal reflections) for solid samples was used. A reference spectrum of the ZnSe crystal was collected before the measurements were carried out. A deal out of the sample (1 ± 0.01 g) was placed on the ZnSe crystal and the optimal while off between sample and ATR crystal was obtained by impregnating the sample with acetone.7...If you neediness to motor a full essay, order it on our website: BestEssayCheap.com

If you want to get a full essay, visit our page: cheap essay

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.